Square Tension Band 4" [14 Gauge]
The American Fence Company
Tighten your square fence’s chain link fabric with this 4” Square Tension Band. Not only do these tension bands tighten fabric, but they also secure things such as tension rods, barb wire and rail tops.
- Made for 4” tubing
- Rust resistant
- Made of steel
How the part fits? 4”square tension band is designed to fit around a 4” square terminal post.
Where is it installed? 4” square tension band is installed by sliding over the 4” square terminal post once the post is set. Tension bands will be evenly placed on each terminal post.
How many do you need? You will need 4” tension bands for every stretch of fence. The amount of tension bands you will need per square terminal post is 1 less than the height of the fence. For example, if you have a 4’ fence you will need (3) 4” square tension bands per terminal post. There are two exceptions, if you have a 3’ or 3-1/2’ fence, you will need (3) 4” square tension bands. For a full stretch of fence from terminal post to terminal post, you will need double the amount. Ex: For a stretch 4’ fence you will need (6) total 4” square tension bands.
4" post size, .18lbs
A 4” square tension band is installed by sliding it over the 4” square terminal post once the post is set. You will need to space the 4” square tension bands evenly on the square terminal post. Then you will slide the 5/16” x 1-1/4” bolt through the tangs and tighten the nut.