This 2” Tension Band connects to a tension bar to tighten the chain link fabric of your fence.
Galvanized; rust resistant
Nuts and bolts not included
For 2” diameter posts
Can be used for gate frames
How the part fits? 2-” tension band is designed to fit around a 2” terminal post.
Where is it installed? 2-1/2” tension band is installed by sliding over the 2” terminal post once the post is set. Tension bands will be evenly placed on each terminal post.
How many do you need? You will need multiple tension bands for every stretch of fence. You will need one less tension band than the height of the fence, with a minimum of 3 tension bands. For example, if you have a 4’ fence you will need (3) 2” Tension Bands per terminal post. For a full stretch of fence from terminal post to terminal post, you will need double the amount. Ex: For a 4’ stretch of fence you will need (6) total 2” tension bands.
2" post size outside diameter, .16lbs
A 2” tension band is installed by sliding it over the 2” terminal post once the post is set. You will need to space the 2” tension bands evenly on the terminal post. Then you will slide the 5/16” x 1-1/4” bolt through the tangs and tighten the nut around the tension bar.