Steel end bands—also known as brace bands—are designed for installing chain link fences. Use them to attach bottom tension wire, horizontal rails, and barbed wire to terminal posts. (Terminal posts include gate posts and end posts.)
Prior to installing the end bands, verify that your chain link fence has been fitted with tension bands. Then, install by slipping the end brand's brace over the terminal post adjacent to the rail end. Now slide the rail end between the end band's tongs. The last step is to use a carriage bolt (sold separately) to secure it.
This 2-1/2" Galvanized Steel End Band [14 Gauge] is rust resistant, as it has been fashioned from galvanized steel.
2-1/2” end bands should be installed after you install your tensions bands. Your end band will slide over your 2-1/2” terminal post adjacent to your rail end. You will then slide your rail end in between the tangs of the end band and place a 5/16” x 1-1/4” carriage bolt through the band and rail end and tighten the nut.