GIVE US A CALL AT (844) 401-8447

How do I build a Vinyl picket fence?

This is one of the easiest installations in fencing.  However, if you do not follow these important steps, you will find yourself returning to the project to repair or replace the fence. 

  1. buildingvinyl-8.gifInstall the rails.  Make sure that both ends of the rail are fully notched. 
  2. Make sure that both notches slide into the post and release on the inside of the post, preventing the rail from being removed.  If this does not occur, the rail may slide out of the post over time.
  3. Installing the pickets.  Make sure that both ends of the picket are fully notched. 
  4. Slide the picket through the top rail into the bottom rail, locking it in place.
  5. Pull on the picket to assure that it does not come out.  If it does re-notch the picket.  

pdf.jpg

© 2018 The American Fence Company. All rights reserved. Permission granted to reproduce for personal and educational use only. Commercial use, copying or distribution is prohibited without express written permission from The American Fence Company.

    © 2018 The American Fence Company. All rights reserved. Permission granted to reproduce for personal and educational use only. Commercial use, copying or distribution is prohibited without express written permission from The American Fence Company.